support > Device Attachment

Introduction to Device Attachment

To attach your device to the Mount'n Mover system, you will need to determine how your device can attach to the Quick Release Plate (QRP).

Some devices attach directly to the QRP and others require an additional attachment plate.

Device plates are sorted by communication device manufacturer.
See the listing below for device manufacturers.

Device Attachment Guide

Though many devices will attach directly to the Quick Release Plate that comes with every Mount’n Mover, others will require an additional device plate.

See the table(s) below for help attaching...

BlueSky Designs Devices

Brand Device Device Plate Needed QRP Hole Set Screws Required*
BlueSky Designs Laptop Tray none Fig. 6 or Fig. 9 (3x) 6-32 x 3/8” Flat Head
Reading Tray
12" x 12" Tray
Universal Rotator DP-UR Fig. 10 (4x) 8-32 x 3/16"

New! The Universal Rotator (DP-UR) allows for an additional axis of rotation for devices. Friction-based, it allows for infinite locking angles - and is particularly useful for eye-tracking devices and portrait-to-landscape devices. The Universal Rotator works for all BlueSky Designs device plates.

* Hardware is included with all device plates or trays unless otherwise noted.
Notify BlueSky Designs at the time of your order if you need additional hardware.

QRP attachment hole set
quick release plate   device attachment figure 6   device attachment figure 9   device attachment figure 10

Dynavox Devices

Plate Specific Instructions: Dynavox Device Plate 1(DP-DV1)

Plate Specific Instructions: Dynavox Eyemax Device Plate (DP-DV2)

Brand Device Device Plate Needed QRP Hole Set Screws Required*
Dynavox V DP-DV1 (optional) Fig. 1 (2x) 8-32 x 5/16” Flat Head
Vmax DP-DV1 (2x) 8-32 x 1/2” Pan Head
Eyemax DP-DV2 Fig. 10
DV4 DP-DV1 Fig. 1 (4x) M4-.7 x 17mm Pan Head
MT4 (2x) M4-.7 x 14mm Flat Head

QRP attachment hole set
quick release plate   device attachment figure 1   device attachment figure 4

Prentke Romich Company(PRC) Devices

Brand Device Device Plate Needed QRP Hole Set Screws Required*
Prentke Romich Company(PRC) ECO 2 DP-PRC1 Fig. 11 (4x) 8-32 x 1/4” Flat Head (included)
ECO 2 with ECOpoint Fig. 12
ECO 14 PRC spacer** Fig. 8 (4x) 8-32 x 5/8” Flat Head (not included)
Pathfinder Fig. 7
SpringBoard none Fig. 6 (3x) 8-32 x 3/8” Flat Head (not included)
Vantage (3x) 8-32 x 5/8” Flat Head (not included)
Vantage Lite DP-PRC2 Fig. 13 (3x) 8-32 x 5/8” Flat Head (included)
Vanguard (2x) PRC spacer** Fig. 7 (3x) 8-32 x 5/8” Flat Head (not included)

** One PRC spacer is included with every new device. Additional plates are available through PRC. Re-use the plate screws to attach where hardware is not included.

QRP attachment hole set
quick release plate   device attachment figure 6   device attachment figure 7   device attachment figure 8   device attachment figure 11   device attachment figure 12   device attachment figure 13

Tobii / ATI Devices

Plate Specific Instructions: Tobii Device Plate (DP-T1)

Brand Device Device Plate Needed QRP Hole Set Screws Required*
Tobii P10 DP-T1 Fig. 5 (4x) M4-.7 x 10mm Flat Head
C8
C12
CEye Fig. 10
LightWriter Fig. 5
QRP attachment hole set
quick release plate   device attachment figure 5   device attachment figure 10

Ablenet Devices

Plate Specific Instructions: AbleNet Device Plate (DP-AN1)

Brand Device Device Plate Needed QRP Hole Set Screws Required*
Ablenet Bigmack Communicator DP-AN1 Fig. 1 (2x) 10-32 x ฝ” Flat Head
(2x) 8-32 x 3/16” Flat Head
Big Step-by-Step communicator
Big Red Switch
Fl4sh scanning communicator
Easy Mounting Base Easy Mounting Base
(available through AbleNet)		 Fig. 2 (2x) 8-32 x 5/16” Flat Head (not included)
(2x)#8 washers & nuts(not included)
iTalk2
Littlemack Communicator
Little Step-by-Step Communicator
Jelly Beamer none Fig. 3 (2x) 6-32 x ฝ” Flat Head (not included)
QRP attachment hole set
quick release plate   device attachment figure 1   device attachment figure 2   device attachment figure 3

Saltillo Devices

Brand Device Device Plate Needed QRP Hole Set Screws Required*
Saltillo ChatPC none Fig. 9 (3x) 6-32 x 3/8”
Flat Head (not included)
QRP attachment hole set
quick release plate   device attachment figure 9

If you do not see your device here, please let us know. We want to help.

Need more help?
Email us, or call us at 1-612-724-7002 so we can best help you)

back to top

Bookmark and Share

On this page:

Related Support Pages

How can we help you?

Warranty info

  • One year warranty
    BlueSky Designs offers a one year warranty on the Mount’n Mover
  • 30 Day Return Policy
    30 day money back guarantee for unused items
    • Click here for more information