Kudu (Etac)

The Kudu frame offers two attachment options--a Bridge Clamp and an Round clamp.
Approach 1: Use bridge clamps on the horizontal section and the bend of the curve
Approach 2: Attach a 1" Round clamp here

Offset options

Offsets attach to the wheelchair attachment hardware, and are used to:

  • Get around obstacles such as trays, brakes, footrests and armrests
  • Position the Wheelchair Bracket so the post is in the optimal position (post can be inserted and removed, brakes are unobstructed, footrests removed, accommodate the tray, etc)
  • Adjust the angle of the hardware and/or bracket to make sure the post is vertical

These plates can all be used to offset. To figure out which offset plate will work for you, see our Offset Guide.

How to mount: 

Attach using a Bridge clamp on the horizontal and curved sections, trying to position them so the Adapter Plate is vertical. If that is not possible, use an L-Angle Extension and the Angle Adjustment Plates to adjust the Wheelchair Bracket to a vertical orientation.

Installation support: 

How to mount: 

Approach 2: Attach to the most vertical section using a Round clamp. Use an Angle Adjustment Plate to adjust the Wheelchair Bracket orientation.

Installation support: