TiLite ZRA

1.250 collar clamp set with angle adjust plate and the WB2 post clamp
1.250 collar clamps with a WC-AAP then a WB2
TiLite with Laptop Tray and Mount'n Mover dual arm

Offset options

Offsets attach to the wheelchair attachment hardware, and are used to:

  • Get around obstacles such as trays, brakes, footrests and armrests
  • Position the Wheelchair Bracket so the post is in the optimal position (post can be inserted and removed, brakes are unobstructed, footrests removed, accommodate the tray, etc)
  • Adjust the angle of the hardware and/or bracket to make sure the post is vertical

These plates can all be used to offset. To figure out which offset plate will work for you, see our Offset Guide.

How to mount: 

Start with our Collar Clamp set of two (size 1.250")  Tube diameter is 1-1/4". 

Attach an angle adjust plate (WC-AAP) to the collar clamps to correct the tilt.  Attach the post clamp (WB2) to the WC-AAP.