TiLite

TiLite Twist--1" round tubing
TiLite ZRA with Laptop Tray and Mount'n Mover dual arm
TiLite ZRA with 1.250 collar clamp set with angle adjust plate and the WB2 post clamp
TiLIte ZRA with 1.250 collar clamps with a WC-AAP then a WB2
TiLite ZRA 1_1/4 inch Tubing
TiLite ZRA 1_1/4 inch Tubing
TiLite ZRA
Ti- Lite with round clamp
1 inch collar clamps_AP4_AAP_WB2
close up
TiLite TRA

Offset options

Offsets attach to the wheelchair attachment hardware, and are used to:

  • Get around obstacles such as trays, brakes, footrests and armrests
  • Position the Wheelchair Bracket so the post is in the optimal position (post can be inserted and removed, brakes are unobstructed, footrests removed, accommodate the tray, etc)
  • Adjust the angle of the hardware and/or bracket to make sure the post is vertical

These plates can all be used to offset. To figure out which offset plate will work for you, see our Offset Guide.

How to mount: 

The TiLite Series of wheelchairs have either 1" or 1-1/4"  tube frames.  Please be specific as to which TiLite to attach to.

Attach to the wheelchair using collar clamps or bridge clamps.  

1" tube frames:  Aero T, TRA, TR, Aero X, 2GX, and pediatric chairs Twist and Pilot.  

1- 1/4" tube frames:  Aero Z, ZRA, ZR

Recommended mounting hardware: 

Bridge clamp (WC-R1B/R7/8B) (WC-R7/8B, WC-R1B, WC-R1B-SET, WC-R7/8B-SET, WC-RMIXED-SET)
Adapter Plate 4 (WC-AP4)
Angle Adjustment Plate (WC-AAP)
Post Clamp (WB2)
Collar Clamp (WC-COLLAR) (WC-COLLAR-75, WC-COLLAR-875, WC-COLLAR-1, WC-COLLAR-1125, WC-COLLAR-30, WC-COLLAR-1250, WC-COLLAR-1375, WC-COLLAR-150)

Installation support: 

Round tubes - Bridge Clamps, Round Clamps, and Collar Clamps