Universal Rotator
The universal rotator adds an additional degree of freedom between the Device and the Quick Release Plate. First attach the device plate to the device (see device attachments page for specific devices), then attach the DP-UR to the device plate.
In this example, we demonstrate attaching the DP-UR to a Dynavox Eyemax device.
The universal rotator is compatible with all Mount'n Mover device plates.
Please contact us if you have any questions or difficulty.
Attach the Universal Rotator
Attach the DP-UR to the Device Plate
Loosen the knob on the DP-UR. Rotate the silver plate so that the four holes on the black plate is exposed. Using the screws that came with the device plate, screw the DP-UR onto the device plate.
Attach the QRP to the DP-UR
With the screws included with the DP-UR, attach the QRP. The "flat" on the DP-UR should be closest to bottom of the QRP.
Four #8-32 x 3/16" flat head screws
Adjusting the Rotator
You can adjust the amount of friction between the DP-UR plates by tightening or loosening the knob.
If intended as a "lock position" always test the rotation!