Frequently Asked Questions

What is the Mount'n Mover?

The Mount'n Mover is a versatile and accessible wheelchair mounting system that can be customized and changed, according to your needs.
For further detail, please read the How it works page

How do I use it?

See our How-To videos section.

How does it mount to a wheelchair?

Please refer to our Wheelchair Mounting page.

Can the mount work with my device?

Refer to the Device Attachment page.

How can I try one in person?

Sign up for the Meet the Mount'n Mover program.
Come visit us at a conference!
Check if a local reseller has a demo kit in your area.

How much does the mount cost?

Typical Mount'n Mover Systems go for:

Tilt'n Turner Systems $960-$1,273
Single Arm Mount'n Mover System $1,180-$1,493
Dual Arm Mount'n Mover System $1,400-$1,713

Customize an exact quote for your system

How is the Mount’n Mover different from other mounts?

Great question! Check out the comparison table.

Can you help me install the mount?

Our team is available for phone, email and/or Skype support.
Please contact us for more details.
If possible we will try and connect you with a trained installer near your location.

How do I order?

You can follow our step-by-step Ordering Guide.

Or you can quickly peruse our Quick Shop Section. 

You can always contact us via phone, fax, or email for any additional help.

Where is my order?

Call us at 1-888-724-7002, or email.

How much does the mount cost?

Typical Mount'n Mover Systems go for:

Tilt'n Turner Systems $960-$1,273
Single Arm Mount'n Mover System $1,180-$1,493
Dual Arm Mount'n Mover System $1,400-$1,713

Customize an exact quote for your system

How do I get it funded?

Check our funding page, or contact us.

How do I mount it to my wheelchair?

Visit our Wheelchair Mounting page.

How do I attach my device?

Visit our Device Attachment page. Then find your specific device for instructions. 

How do I attach to the Dynavox Maestro?

Use the device plate for Dynavox for the Maestro, DP-DV1.
Or, if your Maestro has an eyegaze module, such as Eyemax or Vmax, use the DP-DV2.

How do I program the lock positions?

Check out the video on setting and unsetting lock positions.

Can you help me install the mount?

Our team is available for phone, email and/or Skype support.
Please contact us for more details.
If possible we will try and connect you with a trained installer near your location.

Treat your Mount'n Mover with care and it will serve you well for a very long time.

Here are a few helpful tips for getting the most out of your Mount'n Mover:
DO

  • Periodically clean the mount, wipe components down with mild dish soap (we use Lysol wipes)
  • Periodically tighten Device Attachment screws and Wheelchair Attachment screws
  • Consider securing screws with thread-locker (Loctite, etc) if the set-up is permanent

DO NOT

  • Clean using caustic substances such as Chlorine Bleach
    • Some internal components may corrode
  • Introduce any substance (lubricants, or even soda) inside the rotating joints.
    • Substance build up can disable locking elements.
    • The locking elements require a certain amount of friction to work – any added lubricants may change the locking capacity.
  • Unscrew bolt at the bottom of the Link (see image below)
    • The entire Link Assembly (21 parts) is spring loaded, and will come apart

My Mount'n Mover is not working right, is Loose or Broken - What Should I Do?

Visit our Service request page or call us at 1-888-724-7002.

Here is our Warranty information.

Whenever you have a concern about a specific part of your mounting system, it is always helpful to email our staff pictures prior to calling. The more information you provide, the better we can help you find a better way of day to day.