Comfort

Approach 1: Bridge clamp, attaching to the vertical footrest tube and horizontal seat frame tube.  Approach 2: Attach a Round clamp to the vertical footrest tube and use  L-Angle extension plate to position the Solid Wheelchair bracket.
Create a Bridge clamp with two clamps and an Adapter Plate. Horizontal tube and vertical tube size may vary.

Offset options

Offsets attach to the wheelchair attachment hardware, and are used to:

  • Get around obstacles such as trays, brakes, footrests and armrests
  • Position the Wheelchair Bracket so the post is in the optimal position (post can be inserted and removed, brakes are unobstructed, footrests removed, accommodate the tray, etc)
  • Adjust the angle of the hardware and/or bracket to make sure the post is vertical

These plates can all be used to offset. To figure out which offset plate will work for you, see our Offset Guide.

How to mount: 

Bridge clamp using an Adapter Plate and two bridge clamps. Use an L-Angle Extension to position Post and avoid armrests and brake handles.

Installation support: 

How to mount: 

Attach a full 1" round clamp to vertical tube footrest pivots around. Use the L-Angle Extension to position Wheelchair Bracket just behind footrest hanger.