Elite

Approach 1: Attach 1" round clamp to the vertical tube extending up from the front caster. The mount  will not move as a person tilts. Approach 2: Attach to the leg support's vertical tube, with a bridge clamp. The mount moves as the person tilts.
Determine whether you need to have the mount move with the person as they tilt, or not. Approach 2 moves with them.
Create a Bridge clamp with two clamps and an Adapter Plate. Horizontal tube and vertical tube size may vary.

Offset options

Offsets attach to the wheelchair attachment hardware, and are used to:

  • Get around obstacles such as trays, brakes, footrests and armrests
  • Position the Wheelchair Bracket so the post is in the optimal position (post can be inserted and removed, brakes are unobstructed, footrests removed, accommodate the tray, etc)
  • Adjust the angle of the hardware and/or bracket to make sure the post is vertical

These plates can all be used to offset. To figure out which offset plate will work for you, see our Offset Guide.

How to mount: 

Attach to the vertical tube coming up from the caster. Note: this will not change in orientation when a person's tilt is changed.

How to mount: 

Attach 2 bridge clamps to upright tube section of leg rest, using an Adapter Plate 2 to bridge them. Use an L-Angle Extension to position the Wheelchair bracket as needed. The mount will tilt with the person as they change angles.

Installation support: