Flyer

Coved Spacer Set 1", WC-AP4, WC-AP5, PEK-12

Offset options

Offsets attach to the wheelchair attachment hardware, and are used to:

Get around obstacles such as trays, brakes, footrests and armrests
Position the Wheelchair Bracket so the post is in the optimal position (post can be inserted and removed, brakes are unobstructed, footrests removed, accommodate the tray, etc)
Adjust the angle of the hardware and/or bracket to make sure the post is vertical

These plates can all be used to offset. To figure out which offset plate will work for you, see our Offset Guide.

L-Angled Extension Plate (WC-LAE)

Adapter Plate 2 (WC-AP2)

Adapter Plate 4 (WC-AP4)

Angle Adjustment Plate (WC-AAP)

How to mount:

Attach adapter plate to the wheelchair frame using the "through" holes in the horizontal tubing. Use the Coved Spacers to provide a flat surface for the WC-AP4 adapter plate. Attach the second WC-AP4 to the first to extend forward enough for the WB2 (post clamp) to clear the wheelchair. Use a PEK12 to extend out further if there is a tray being used at the same time as the mount.