Stroller (Cruiser, EZRider)

Convaid Cruiser
Clamping to the Convaid Cruiser or any sloping tube

Offset options

Offsets attach to the wheelchair attachment hardware, and are used to:

  • Get around obstacles such as trays, brakes, footrests and armrests
  • Position the Wheelchair Bracket so the post is in the optimal position (post can be inserted and removed, brakes are unobstructed, footrests removed, accommodate the tray, etc)
  • Adjust the angle of the hardware and/or bracket to make sure the post is vertical

These plates can all be used to offset. To figure out which offset plate will work for you, see our Offset Guide.

How to mount: 

Use the Attach Angle Adjust Adapter Plate (WC-AAP) to attach to the  7/8" Bridge Clamps (or 7/8" Round Clamp) on sloping tube.   The Angle Adjust plate orients the Solid Wheelchair Bracket so the Post sits vertically.