Stroller (Cruiser, EZRider; Trekker)

Offset options

Offsets attach to the wheelchair attachment hardware, and are used to:

  • Get around obstacles such as trays, brakes, footrests and armrests
  • Position the Wheelchair Bracket so the post is in the optimal position (post can be inserted and removed, brakes are unobstructed, footrests removed, accommodate the tray, etc)
  • Adjust the angle of the hardware and/or bracket to make sure the post is vertical

These plates can all be used to offset. To figure out which offset plate will work for you, see our Offset Guide.

How to mount: 

Round clamps or Collar clamps with WC-AP4; AAP for vertical post attachment; sandwich with tie down

Installation support: 

Suggested extra parts

Manufacturer parts: 

Collar clamps or Round clamps, based on the stroller tube diameter must be ordered. Call us.

How to mount: 

Attach Adapter Plate to holes in the sloping tube. Use cove spacers so the plate sits solidly. Use the Angle Adjust plate to orient the Solid Wheelchair Bracket so the Post sits vertically.