NXT

Approach 1: Attach an Adapter Plate, using the thru holes
Attach the Adapter Plate in a vertical or horizontal orientation
Attach in the orientation that makes sense.
Approach 2: Use a pair of 1" Collar clamps and an Adapter Plate to create a bridge. Attach the Collar Clamps.
Collar clamps installed.
Attach the Adapter Plate (AP2 or AP4) to the Collar Clamps
The Solid Wheelchair bracket then attaches to the Adapter Plate.
Ready to talk'n roll and tilt! A Dual Arm is holding a tray at eye gaze distance.

Offset options

Offsets attach to the wheelchair attachment hardware, and are used to:

  • Get around obstacles such as trays, brakes, footrests and armrests
  • Position the Wheelchair Bracket so the post is in the optimal position (post can be inserted and removed, brakes are unobstructed, footrests removed, accommodate the tray, etc)
  • Adjust the angle of the hardware and/or bracket to make sure the post is vertical

These plates can all be used to offset. To figure out which offset plate will work for you, see our Offset Guide.

How to mount: 

Attach an Adapter Plate, using the thru holes. Use an Angle Adjustment Plate or L-Angle Extension if necessary.

Installation support: 

Suggested extra parts

Other hardware: 

1.5" long 1/4" Bolts with lock nuts (2 each)

How to mount: 

Use 2 1" Collar Clamps and an Adapter Plate 2 to create a bridge, or to attach on the horizontal seat tube. Use an L-Angle Extension plate or Angle Adjustment plate if necessary. Collar clamps can clamp tighter, because they go around the entire tube instead of partially, like the Round Clamp.

Installation support: