Bingo Evolution Stroller

Hoggi Bingo Evolution
We recommend attachment area #4 with the 1" bridge clamps
1" Bridge Clamps __WC-AP2__WC-AAP__PEK 12_  (angle adjust plate) corrects the downward sloping angle to get the posts horizontal and vertical.
1" bridge clamps with an AP2 attached. WC-AAP  corrects the angle so the post can be horizontal on the PEK
Hoggi Bingo overhead view of parts

Offset options

Offsets attach to the wheelchair attachment hardware, and are used to:

  • Get around obstacles such as trays, brakes, footrests and armrests
  • Position the Wheelchair Bracket so the post is in the optimal position (post can be inserted and removed, brakes are unobstructed, footrests removed, accommodate the tray, etc)
  • Adjust the angle of the hardware and/or bracket to make sure the post is vertical

These plates can all be used to offset. To figure out which offset plate will work for you, see our Offset Guide.

How to mount: 

Attach the 1" bridge clamps to the upper  tube frame (see yellow lines in picture).  The stroller should still be able to fold up when the hardware is attached.  Use the WC-AAP (Angle adjust plate) to position the WB2 so the post can be vertical.