Arc

Ki Mobility Arc Bridge Clamps_AP2_AAP_WB2
WC-R1Bridge Clamps, WC-AP4, WC-AAP, WB2
1" bridge clamps to vertical and horizontal tubing
Tilted AP4 plate -WC_AAP corrects the post clamp to vertical

Offset options

Offsets attach to the wheelchair attachment hardware, and are used to:

  • Get around obstacles such as trays, brakes, footrests and armrests
  • Position the Wheelchair Bracket so the post is in the optimal position (post can be inserted and removed, brakes are unobstructed, footrests removed, accommodate the tray, etc)
  • Adjust the angle of the hardware and/or bracket to make sure the post is vertical

These plates can all be used to offset. To figure out which offset plate will work for you, see our Offset Guide.

How to mount: 

Attach 1" bridge  clamps to the vertical and horizontal tubing.   The WC-AP4 will be attached to the bridge clamps (use through holes and/or slots---not threaded holes).   Try to get the AP4 plate either vertical or horizontal.  If it works best tilted (as in the picture), then use the WC-AAP plate to correct the WB2 (post clamp) to vertical.

Recommended mounting hardware: 

Bridge clamp (WC-R1B/R7/8B) (WC-R7/8B, WC-R1B, WC-R1B-SET, WC-R7/8B-SET, WC-RMIXED-SET)
Adapter Plate 4 (WC-AP4)
Angle Adjustment Plate (WC-AAP)
Solid Wheelchair Bracket (WB2)
Add products to quote