Leggero Trak

Offset options

Offsets attach to the wheelchair attachment hardware, and are used to:

  • Get around obstacles such as trays, brakes, footrests and armrests
  • Position the Wheelchair Bracket so the post is in the optimal position (post can be inserted and removed, brakes are unobstructed, footrests removed, accommodate the tray, etc)
  • Adjust the angle of the hardware and/or bracket to make sure the post is vertical

These plates can all be used to offset. To figure out which offset plate will work for you, see our Offset Guide.

How to mount: 

Attach the oval tube clamps loosely to the frame.  Bridge the WC-AP4 plate across the oval clamps.   Attach the post clamp (WB2) to the AP4 plate.   If necessary, attach the Angle Adjust Plate (WC-AAP) between the AP4 and WB2 to correct the post clamp to vertical.