Quickie 2

Bridge clamps: one horizontal and one vertical, with an AP2 adapter plate, and Solid Wheelchair Bracket.
The post cannot interfere with brake actuation. This person does not use footrests. He uses his legs to aid in propulsion.
The potential bridge clamp mount spots are highlighted. The yellow section takes a 1" Bridge clamp and the blue "J" tube section takes a 7/8" Bridge clamp.
Inside view of bridge clamp attachment.
L-angle extension plate adjusts the position of the Wheelchair Bracket to allow footrest removal, brake activation and propulsion..
Quickie 2- 1" tubing
Quickie 2- 1" tubing

Offset options

Offsets attach to the wheelchair attachment hardware, and are used to:

  • Get around obstacles such as trays, brakes, footrests and armrests
  • Position the Wheelchair Bracket so the post is in the optimal position (post can be inserted and removed, brakes are unobstructed, footrests removed, accommodate the tray, etc)
  • Adjust the angle of the hardware and/or bracket to make sure the post is vertical

These plates can all be used to offset. To figure out which offset plate will work for you, see our Offset Guide.

How to mount: 

Use a Bridge Clamp, with one on the horizontal tube and one vertical (Use WC-R1B-Set 1") ; or on the "J" curve connecting horizontal and vertical tubes (Use WC-RMIXED Set 1" and 7/8").

Installation support: