The Rhythm sometimes has round tube with thru holes
Attach AP4 with long bolts and lock nuts
As needed, attach an L-Angle Extension plate to the AP4.  In this case, an AP2 was attached to the LAE.
Another option was to attach the WB2 to the LAE plate
Mount'n Mover attached to a Maestro
Mount'n Mover off to the side, for use when he pulls up to a table.

Offset options

Offsets attach to the wheelchair attachment hardware, and are used to:

  • Get around obstacles such as trays, brakes, footrests and armrests
  • Position the Wheelchair Bracket so the post is in the optimal position (post can be inserted and removed, brakes are unobstructed, footrests removed, accommodate the tray, etc)
  • Adjust the angle of the hardware and/or bracket to make sure the post is vertical

These plates can all be used to offset. To figure out which offset plate will work for you, see our Offset Guide.

How to mount: 

Attach an Adapter Plate directly to the round tube through two holes, using long bolts and lock nuts.

Use additional Offsets as needed to position the Wheelchair Bracket.

Installation support: