Xperience 2

Quickie Xperience Power Wheelchair (has T-Nut track)

Offset options

Offsets attach to the wheelchair attachment hardware, and are used to:

  • Get around obstacles such as trays, brakes, footrests and armrests
  • Position the Wheelchair Bracket so the post is in the optimal position (post can be inserted and removed, brakes are unobstructed, footrests removed, accommodate the tray, etc)
  • Adjust the angle of the hardware and/or bracket to make sure the post is vertical

These plates can all be used to offset. To figure out which offset plate will work for you, see our Offset Guide.

How to mount: 

   Insert the T-Nut into the slide track on either side of the wheelchair (just under the seat).  Attach the WC-AP2 or WC-AP4 to the T-Nut (the AP2 plate is longer than the AP4 so which ever adapter plate is preferable).   Attach the WC-LAE to the AP2 or AP4.  Then attach  the WB2 (post clamp) to the WC-LAE.

Always use 'through' holes to threaded holes when attaching adapter plates!