Zippie Simba

Simba wheelchair with round tube frame--attach using a Bridge Clamp

Attach with bridge clamps on either side of the bend

Attach bridge clamps to the horizontal tube and vertical tube, bridging them with an Adapter Plate.

Attach a Bridge clamp to both the horizontal and vertical tube sections, on either side of the bend. Notice the use of the Adapter Plate and L-Angle Extension to move the Wheelchair Bracket to avoid interfering with the brakes.

Offset options

Offsets attach to the wheelchair attachment hardware, and are used to:

Get around obstacles such as trays, brakes, footrests and armrests
Position the Wheelchair Bracket so the post is in the optimal position (post can be inserted and removed, brakes are unobstructed, footrests removed, accommodate the tray, etc)
Adjust the angle of the hardware and/or bracket to make sure the post is vertical

These plates can all be used to offset. To figure out which offset plate will work for you, see our Offset Guide.

L-Angled Extension Plate (WC-LAE)

Adapter Plate 2 (WC-AP2)

Adapter Plate 4 (WC-AP4)

Angle Adjustment Plate (WC-AAP)

How to mount:

Attach using a Bridge clamp at the bend of the frame, using the Adapter Plate to bridge the two clamps. Use offsets as needed--the Angle Adjustment plate, and L-Angle Extension--to position the Wheelchair bracket vertically and to allow for propulsion and brake actuation.