TiLite Twist--1" round tubing

Offset options

Offsets attach to the wheelchair attachment hardware, and are used to:

  • Get around obstacles such as trays, brakes, footrests and armrests
  • Position the Wheelchair Bracket so the post is in the optimal position (post can be inserted and removed, brakes are unobstructed, footrests removed, accommodate the tray, etc)
  • Adjust the angle of the hardware and/or bracket to make sure the post is vertical

These plates can all be used to offset. To figure out which offset plate will work for you, see our Offset Guide.

How to mount: 

Attach to the wheelchair using collar clamps or bridge clamps.  
TiLite Twist has 1" tubing.  TiLite Aero X has 1 1/4" tubing.  TiLite Aero Z has 1 1/4" tubing.  Please measure the circumference for an accurate clamp size!

Installation support: 

Suggested extra parts

Manufacturer parts: 

Tube sizes vary depending on your specific chair frame.   Measure the circumference of the tube and then contact us for more information!

How to mount: 

Use two collar clamps, bridging them with an Adapter Plate. Attach to the downward-sloping tube or two points in the curve.

Ti-Lite Twist has 1" diameter tubing.

Installation support: