Xperience 2

Quickie Xperience Power Wheelchair (has T-Nut track)

Offset options

Offsets attach to the wheelchair attachment hardware, and are used to:

  • Get around obstacles such as trays, brakes, footrests and armrests
  • Position the Wheelchair Bracket so the post is in the optimal position (post can be inserted and removed, brakes are unobstructed, footrests removed, accommodate the tray, etc)
  • Adjust the angle of the hardware and/or bracket to make sure the post is vertical

These plates can all be used to offset. To figure out which offset plate will work for you, see our Offset Guide.

How to mount: 

Slide the T-Nut into the track along the seat.  Attach the WC-AP4 or WC-AP2 plate to the T-Nut.  Attach the WC-LAE plate to the previous plate (AP4 or AP2) .  The WC-LAE plate is to offset the post to get around the arm rest.  If not needed then the WB2 (post clamp) can be attached directly to the AP2 or 4 adapter plate.