Tracer Sx5

1" collar clamps / WC-AP4 / WB2
1" collar clamps outside view
1" bridge clamps inside view
1" bridge clamps / WC-AP4 / WB2

Offset options

Offsets attach to the wheelchair attachment hardware, and are used to:

  • Get around obstacles such as trays, brakes, footrests and armrests
  • Position the Wheelchair Bracket so the post is in the optimal position (post can be inserted and removed, brakes are unobstructed, footrests removed, accommodate the tray, etc)
  • Adjust the angle of the hardware and/or bracket to make sure the post is vertical

These plates can all be used to offset. To figure out which offset plate will work for you, see our Offset Guide.

How to mount: 

Use either 1" Collar Clamps or 1" Bridge Clamps on the vertical and horizon tubing.  Bridge across the clamps with a WC-AP4 or a WC-AP2 adapter plate.   Attach the WB2 (post clamp) directly to the AP2 or AP4 or use a LAE to offset to the outside if needed.

Recommended mounting hardware: 

Collar Clamp (WC-COLLAR) (WC-COLLAR-75, WC-COLLAR-875, WC-COLLAR-1, WC-COLLAR-1125, WC-COLLAR-30, WC-COLLAR-1250, WC-COLLAR-1375, WC-COLLAR-150)
Bridge clamp (WC-R1B/R7/8B) (WC-R7/8B, WC-R1B, WC-R1B-SET, WC-R7/8B-SET, WC-RMIXED-SET)
Adapter Plate 4 (WC-AP4)
Solid Wheelchair Bracket (WB2)
L-Angled Extension Plate (WC-LAE)
Add products to quote