remove end cap to expose track
Remove Screw
Slide T-nut into track
Insert T-Nut into the slot
Attach WB2 to T-Nut
reinsert the screw
Mount'n Mover mounted to the chair

Offset options

Offsets attach to the wheelchair attachment hardware, and are used to:

  • Get around obstacles such as trays, brakes, footrests and armrests
  • Position the Wheelchair Bracket so the post is in the optimal position (post can be inserted and removed, brakes are unobstructed, footrests removed, accommodate the tray, etc)
  • Adjust the angle of the hardware and/or bracket to make sure the post is vertical

These plates can all be used to offset. To figure out which offset plate will work for you, see our Offset Guide.

How to mount: 

T-nut in slide track; offsets as needed. 

***Size T-Nut to fit Amy System Track (remove .030 from bottom)*****

Installation support: