Sedeo Lite/Puma20

Sedeo Lite/Puma 20 does not have Sedeo seat track. Approach 1: requires custom drilling to attach an Adapter Plate; Approach 2: use Sedeo nuts in the track on the underside of the armrest to attach an Adapter Plate and/or an L-Angle Extension Plate.
The Puma arm track and Sedeo track nut can be used to attach an Adapter plate. It is rated the second choice because there may be more movement from the armrest moving, than in attaching to the frame.
Sedeo track nut

Offset options

Offsets attach to the wheelchair attachment hardware, and are used to:

  • Get around obstacles such as trays, brakes, footrests and armrests
  • Position the Wheelchair Bracket so the post is in the optimal position (post can be inserted and removed, brakes are unobstructed, footrests removed, accommodate the tray, etc)
  • Adjust the angle of the hardware and/or bracket to make sure the post is vertical

These plates can all be used to offset. To figure out which offset plate will work for you, see our Offset Guide.

How to mount: 

Custom: Drill two holes in the frame to attach either the Adapter Plate or an L-Angle Extension Plate. Use nuts and bolts to attach. An alternate approach is to use existing bolt holes.

Installation support: 

How to mount: 

Attach to the underside of the armrests, in the Sedeo tracks, using Sedeo track nuts and an Adapter Plate 4 and/or an L-Angle Extension Plate.

Installation support: 

Suggested extra parts

Manufacturer parts: 

Sedeo track nuts (2) and M5 bolts to attach to track on the underside of the armrest.