Little Wave Clik

Collar Clamps, WC-AP4, WC-AAP, WB2
Attach the Angle Adjust Plate overlapping the WC-AP4 plate
Attach the Angle Adjust Plate overlapping the WC-AP4 plate
Little Wave Clik foot plate
1.125 collar clamps with WC-AAP and WB2
Ki Mobility Little Wave Clik
Little Wave Clik
Collar Clamps with WC-AAP and WB2

Offset options

Offsets attach to the wheelchair attachment hardware, and are used to:

  • Get around obstacles such as trays, brakes, footrests and armrests
  • Position the Wheelchair Bracket so the post is in the optimal position (post can be inserted and removed, brakes are unobstructed, footrests removed, accommodate the tray, etc)
  • Adjust the angle of the hardware and/or bracket to make sure the post is vertical

These plates can all be used to offset. To figure out which offset plate will work for you, see our Offset Guide.

How to mount: 

The Little Wave Clik tube size is 1.125 (1-1/8").  Attach an adapter plate (either a WC-AP2 or a WC-AP4) by "bridging" across the collar clamps .  An angle adjust plate will be needed next to correct the angle and get the post to vertical.

Recommended mounting hardware: 

Collar Clamp (WC-COLLAR) (WC-COLLAR-75, WC-COLLAR-875, WC-COLLAR-1, WC-COLLAR-1125, WC-COLLAR-30, WC-COLLAR-1250, WC-COLLAR-1375, WC-COLLAR-150)
Angle Adjustment Plate (WC-AAP)
Adapter Plate 4 (WC-AP4)
L-Angled Extension Plate (WC-LAE)
Solid Wheelchair Bracket (WB2)
Add products to quote