M5

Offset options

Offsets attach to the wheelchair attachment hardware, and are used to:

  • Get around obstacles such as trays, brakes, footrests and armrests
  • Position the Wheelchair Bracket so the post is in the optimal position (post can be inserted and removed, brakes are unobstructed, footrests removed, accommodate the tray, etc)
  • Adjust the angle of the hardware and/or bracket to make sure the post is vertical

These plates can all be used to offset. To figure out which offset plate will work for you, see our Offset Guide.

How to mount: 

Attach the adapter plate 4 (WC-AP4) to the unitrack seat rail using the four bolts and nuts included with the plate.  Use the L-Angle Extension Plate (WC-LAE ) if neccessary to bump out the post clamp to get up around the arm rest.   Attach the WB2 (post clamp) to either the AP4 or the LAE depending on what is used.   

Recommended mounting hardware: 

Adapter Plate 4 (WC-AP4)
L-Angled Extension Plate (WC-LAE)
Solid Wheelchair Bracket (WB2)
Add products to quote