EasyLifeT

Use a bridge clamp to attach to the frame and use offsets as needed to position the Wheelchair Bracket..
Attach bridge clamps to the horizontal tube and vertical tube, bridging them with an Adapter Plate.
Bridge clamps: one horizontal and one vertical, with an AP2 adapter plate, and Solid Wheelchair Bracket.
L-angle extension plate adjusts the position of the Wheelchair Bracket to allow footrest removal, brake activation and propulsion..

Offset options

Offsets attach to the wheelchair attachment hardware, and are used to:

  • Get around obstacles such as trays, brakes, footrests and armrests
  • Position the Wheelchair Bracket so the post is in the optimal position (post can be inserted and removed, brakes are unobstructed, footrests removed, accommodate the tray, etc)
  • Adjust the angle of the hardware and/or bracket to make sure the post is vertical

These plates can all be used to offset. To figure out which offset plate will work for you, see our Offset Guide.

How to mount: 

Use a Bridge Clamp, with one clamp on the horizontal tube and one on the vertical tube, bridged with an Adapter Plate.

Use an L-Angle Extension plate to position the Wheelchair Bracket where needed.

Installation support: