Q 700-M

Q700 M
showing track on side
Quickie Q700 M track

Offset options

Offsets attach to the wheelchair attachment hardware, and are used to:

  • Get around obstacles such as trays, brakes, footrests and armrests
  • Position the Wheelchair Bracket so the post is in the optimal position (post can be inserted and removed, brakes are unobstructed, footrests removed, accommodate the tray, etc)
  • Adjust the angle of the hardware and/or bracket to make sure the post is vertical

These plates can all be used to offset. To figure out which offset plate will work for you, see our Offset Guide.

How to mount: 

Attach the mount opposite the joystick whenever possible.  Slide the Quickie T-Nuts into the track along the seat.   With the Quickie T-Nuts as close to the front of the track as possible, attach the WC-AP4 adapter plate to the T-Nuts.   If you need to offset to get around the armrest then attach the L-Angle Extension Plate to the AP4 plate.   Finally, attach the WB2 (post clamp) to the WC-AP4 or the WC-LAE adapter plate depending on what you used.

Recommended mounting hardware: 

Adapter Plate 4 (WC-AP4)
L-Angled Extension Plate (WC-LAE)
Solid Wheelchair Bracket (WB2)
Add products to quote