Q7

Q7--Tube size is oval and requires  a specific clamp
Hardware for attaching to Quickie Q7

Offset options

Offsets attach to the wheelchair attachment hardware, and are used to:

  • Get around obstacles such as trays, brakes, footrests and armrests
  • Position the Wheelchair Bracket so the post is in the optimal position (post can be inserted and removed, brakes are unobstructed, footrests removed, accommodate the tray, etc)
  • Adjust the angle of the hardware and/or bracket to make sure the post is vertical

These plates can all be used to offset. To figure out which offset plate will work for you, see our Offset Guide.

How to mount: 

Bridge across two of the oval tube clamps. using an AP2 or AP4 adapter plate.  Use the Angle Adjust Plate (AAP) to correct the post clamp (WB2) to vertical. The Q7 and the 7R are the two Quickie Wheelchairs with oval tubing. Tip:  mount higher up on the downward tubing to avoid the compound curves.