Zippie RS

Attach using the tie-down holes or other holes in the tube as shown. Use offsets as needed.
Attach an Adapter Plate to a frame components with two bolts and lock nuts.
Adapter Plate "sandwiched" between tie-down and wheelchair; attach the Wheelchair Bracket to the Adapter Plate.
AP4 plate attached to round frame with holes
Adapter Plates as Offsets
Use L-Angle Extension plates (WC-LAE) as Offsets

Offset options

Offsets attach to the wheelchair attachment hardware, and are used to:

  • Get around obstacles such as trays, brakes, footrests and armrests
  • Position the Wheelchair Bracket so the post is in the optimal position (post can be inserted and removed, brakes are unobstructed, footrests removed, accommodate the tray, etc)
  • Adjust the angle of the hardware and/or bracket to make sure the post is vertical

These plates can all be used to offset. To figure out which offset plate will work for you, see our Offset Guide.

How to mount: 

Approach 2: Attach Adapter Plate to the tubes with holes, bolts and nuts. Use the coved spacers (optional)

Use offsets to position the Wheelchair Bracket as needed.

Installation support: