Combi frame (Etac)

Combi frame allows slide track attachment for different R82 seating options.
Expanda seat on a Combi-frame with a track for attachment.
R82 Combi track -- requires R82 nuts for attachment

Offset options

Offsets attach to the wheelchair attachment hardware, and are used to:

  • Get around obstacles such as trays, brakes, footrests and armrests
  • Position the Wheelchair Bracket so the post is in the optimal position (post can be inserted and removed, brakes are unobstructed, footrests removed, accommodate the tray, etc)
  • Adjust the angle of the hardware and/or bracket to make sure the post is vertical

These plates can all be used to offset. To figure out which offset plate will work for you, see our Offset Guide.

How to mount: 

Combi frame slide track:

Attach an Adapter Plate 4 to the track, using 2 R82 T-nuts.

Use offsets such as the L-Angle Extension, Angle Adjustment Plate and other Adapter Plates to move the Wheelchair Bracket to an optimal position.

Installation support: 

Suggested extra parts

Manufacturer parts: 

R82 t-nut (2)