Use the two existing holes with longer bolts to attach Adapter plate
Remove bolts
The bolts screw into two welded nuts. Make sure the replacement bolts extend out beyond the nut.

Offset options

Offsets attach to the wheelchair attachment hardware, and are used to:

  • Get around obstacles such as trays, brakes, footrests and armrests
  • Position the Wheelchair Bracket so the post is in the optimal position (post can be inserted and removed, brakes are unobstructed, footrests removed, accommodate the tray, etc)
  • Adjust the angle of the hardware and/or bracket to make sure the post is vertical

These plates can all be used to offset. To figure out which offset plate will work for you, see our Offset Guide.

How to mount: 

Use the two bolt holes used to attach the footrest hardware to attach an Adapter Plate 4.

Remove the bolts and replace with longer ones.

Attach the Wheelchair Bracket.

Use Offsets and washers as needed.

Installation support: 

Suggested extra parts

Other hardware: 

M6 hardware and washers or spacers