Simple Mount with Quick Connect (SM-QC-H-P8, SM-QC-H-P12, SM-QC-H-P18, SM-QC-H-P24, SM-QC-H-P36, SM-QC-L-P8, SM-QC-L-P12, SM-QC-L-P18, SM-QC-L-P24, SM-QC-L-P36)

Available Now!

Move and adjust it yourself. It's Simple.

If you need a device right in front of your armrest, this can offer a cost-effective solution

  • You can adjust the device or tray postiion--swivel it and tilt it
  • Product includes:
    • Quick Connect Receiver, for device attachment
    • Post (you choose the length)
    • High or low resistance hinge for tilt adjustment

Swivel it!

  • You can swivel it to the best position for you
  • There are no locking positions
  • To keep the device from swiveling, tighten ithe adjustment bolt

Tilt it!

  • Adjust the tilt angle to the best position for you
  • Fold it down when you want it out of your visual field
  • Choose the high or low resistance hinge, based on your needs
  • The tilt does not lock
    • It may not be suitable for heavy devices
    • It depends on the Quick Connect attachment point
    • If you push hard when you activate your device, it may move

Change devices! 

  • Change devices easily, without tools
  • Device or tray needs to use the Quick Connect Receiver-style attachment
  • Many speech devices come equipped with a plate or recess that connects easily
  • Our new Quick Connect Plate can be attached to our trays

Attach to Wheelchairs or Tables

  • Use Mount'n Mover's wheelchair attachment hardware (not included) to attach to a wheelchair
  • Use Mount'n Mover Table Clamp for height-adjustable table access

 

Compatibility:

  • The Quick Connect Receiver (DP-QCR) attaches securely to a wide range of speech devices, via standard plates and molded recesses within speech device cases
  • The QCR is compatible with the Quick Connect Plate, which can be attached to the Mount'n Mover trays
  • Disclaimer: There may be some plates and devices we have not tested which do not work

Release Lever and Catch:

  • The red release lever is spring-loaded
  • It will automatically engage when it reaches the hole or retaining ledge in the device or plate
  • It is difficult to accidentally release, requiring an intentional and specific action to release
  • Lift on the curved surface with a finger or thumb. It takes very little force, making it easy to release

Quick Connect Operation:

  • Align the QCR with the recess (or plate) on the back of the device you are attaching
  • The spring-loaded release lever offers a little resistance, so you need to first push the device (or plate) into the Receiver, and then slip it down into place 
  • When it arrives at the mating hole or notch, the catch on the release lever springs into place, positively locking the device in place

Attach to wheelchairs using Mount'n Mover wheelchair attachment hardware

Attach to tables using the Table Clamp

Compare to similar products:

Easy Mover Dual Arm with Tilt Plate

Base price: $750.00

Available Now!

Easy to set up and use: just move it!

  • Movable mount for speech devices, trays, cameras, and more! 
  • Easy and intuitive to use--just move it!      
  • 3 movable joints (shoulder, elbow, wrist)

Joint resistance

  • Joints can be adjusted from low to high resistance, making it easier or harder to move

Tilt functions/features

  • Tilt Plate is compatible with Quick Release Plate
  • Adjust tilt from 0-180 degrees
  • Tilt hinge on Tilt Plate is available with either low or high resistance

Compare to original Mount'n Mover

  • Same reach 
  • Lower price
  • Sleek and simple design--no hoop and paddle
  • Easier to use out of the box 
  • Tilt and arm joints do not lock
  • Same load capacity: 15 pounds

Recommendation considerations:

  • Keep in mind that the tilt angle and joint positions do not lock 

You may not want to use the Easy Mover for a heavy device if:

  • the person has a heavy device and uses their device with their wheelchair tilted; or
  • the person uses an eye gaze device, the device tilts downward, and they drive in this position

View product →

Easy Mover Single Arm with Tilt Plate

Base price: $600.00

Available Now!

Easy to set up and use: just move it!

  • Movable mount for speech devices, trays, cameras, and more! 
  • Easy and intuitive to use--just move it!      
  • 2 movable joints (shoulder, wrist)

Adjustable joint resistance

  • Joints can be adjusted from low to high resistance, making it easier or harder to move

Tilt details:

  • Tilt Plate is compatible with Quick Release Plate (QRP)
  • Adjust tilt from 0-180 degrees
  • Tilt hinge on Tilt Plate is available with either low or high resistance

Compare to original Mount'n Mover

  • Same reach 
  • Lower price 
  • Sleek design, with no hoop or paddle
  • Easier to use out of the box 
  • Tilt and arm joints do not lock
  • Same load capacity: 15 pounds

Recommendation considerations:

  • Keep in mind that the tilt angle does not lock 
  • You may not want to use the Easy Mover for a heavy device if:
    • the person has a heavy device and uses their device with their wheelchair tilted; or
    • the person uses an eye gaze device, the device tilts downward, and they drive in this position

View product →

Easy Mover Single Arm with Quick Connect

Base price: $600.00

Easy to set up and use: just move it!

  • Movable mount for speech devices, trays, cameras, and more!    
  • Easy and intuitive to use--just move it!
  • 2 movable joints (shoulder and wrist)

​Adjustable joint resistance

  • Joints can be adjusted from low to high resistance, making it easier or harder to move

New Quick Connect Reseiver is compatible with:

  • Built-in features and plates on many speech devices and other mounts 
  • Mount'n Mover trays and device plates using Quick Connect Plate (DP-QCP)

Tilt functions/features

  • Adjust tilt from 0-180 degrees
  • Tilt hinge on Quick Connect Receiver is available with either low or high resistance

Compare to Single Arm Mount'n Mover

  • Same reach 
  • Lower price 
  • Easier to use out of the box 
  • Sleek design, without hoop and paddle
  • Tilt and arm joints do not lock
  • Same load capacity: 15 pounds

Recommendation considerations:

  • Keep in mind that the arm joints and tilt angle do not lock 
  • You may not want to use the Easy Mover for a heavy device if:
    • the person has a heavy device and uses their device with their wheelchair tilted; or
    • the person uses an eye gaze device; or 
    • the device tilts downward, and they drive in this position

View product →

Easy Mover Dual Arm with Quick Connect

Base price: $750.00

Available Now!

Easy to set up and use: just move it!

  • Movable mount for speech devices, trays, cameras, and more! 
  • Easy and intuitive to use--just move it!      
  • 3 movable joints (shoulder, elbow, wrist)

Joint resistance

  • Joints can be adjusted from low to high resistance, making it easier or harder to move

New Quick Connect Receiver is compatible with:

  • Built in features and plates on many speech devices
  • Mount'n Mover trays and device plates using Quick Connect Plate

Tilt functions/features

  • Adjust tilt from 0-180 degrees
  • Tilt hinge on Quick Connect Receiver is available with either low or high resistance

Compare to original Mount'n Mover

  • Same reach 
  • Lower price 
  • Sleek design, without hoop and paddle
  • Easier to use out of the box 
  • Tilt and arm joints do not lock
  • Same load capacity: 15 pounds

Recommendation considerations:

  • Keep in mind that the tilt angle does not lock 
  • You may not want to use the Easy Mover for a heavy device if:
    • the person has a heavy device and uses their device with their wheelchair tilted; or
    • the person uses an eye gaze device, the device tilts downward, and they drive in this position

View product →

Simple Mount Large (9" x 11.5" x .375")

Base price: $310.00

The Simple Mount Large offers a simple, stable, cost-effective and versatile mount for tablets, phones, remotes, switches, eating, reading etc.  

The Simple Large includes a post with a plate attached to a variable angle hinge, allowing positioning of devices at a range of angles (0-90 degrees) and rotation (360 degrees) for optimal viewing and access. It can flip down alongside the post for storage and transfers. There are no locks or mechanisms. It is simple, but very useful.

Attach things with velcro, double back tape or other methods. 
Two Lip Supports are included in the kit to provide edges to keep things from falling off the polycarbonate plate.

Attaches to wheelchairs using Mount'n Mover Wheelchair Hardware: Solid Wheelchair Bracket and Adapter Plates, T-nuts, Round Clamps and L-Angle offsets (must be ordered separately)

May be used with a Dual or Single Arm Mount'n Mover to create a Double-Decker.

The Simple Mount Large Tray is shipped with the tray attached to the center on the post. The four threaded holes on the tray provides the option to offset the tray either to left or the right of the post. This allows additional customization of the trays position if needed for physical or visual access (see photo to the left)

Instructions for the Simple Mount Large or Small

View product →

Simple Mount Small (3.5" x 7.0" x .25")

Base price: $220.00

The Simple Mount Small offers a simple, stable, cost-effective and versatile mount for phones, switches and remotes.

The Simple Mount Small includes a post with a plate attached to a variable angle hinge, allowing positioning of devices at a range of angles (0-90 degrees) and rotation (360 degrees) for optimal viewing and access. It can flip down alongside the post for storage and transfers. There are no locks or mechanisms. It is simple, but very useful.

Attach things with velcro, double back tape or other methods.  One Lip Support is included in the kit to provide an edge to keep things from falling off the polycarbonate plate.   Additional Lip Supports sold separately.

Attaches to wheelchairs using Mount'n Mover Wheelchair Hardware: Solid Wheelchair Bracket and Adapter Plates, T-nuts, Round Clamps and L-Angle offsets (must be ordered separately)

May be used with a Dual or Single Arm Mount'n Mover to create a Double-Decker.

Instructions for the Simple Mount Large or Small

View product →

Tilt'n Turner

Base price: $635.00

The Tilt'n Turner is our most compact mount featuring one rotational joint, referred to as the wrist, and 24 possible lock positions.
It does not swingaway and is accessible on the side where it is mounted.

Full extension:

0 inches from shoulder to wrist joint. (No arm)
Tilt from 0° to 110°

User Controls:

Easy-access, one-handed operation
Lever unlocks wrist only
Tilt lock lever 

Effort to unlock and move:

<1.5 pound pressure to unlock. Force to move varies with device weight.
Adjustable friction screw changes force required to move it.

Force to adjust tilt depends on torque hinge selected.

Reach required to reposition:

Allows a person to rotate their device or tray 360 degrees; 
Accessible to hand on the side it is mounted to.

View product →

Single Arm

Base price: $855.00

The single arm is more compact than the dual arm featuring 2 rotational joints, referred to as the shoulder and wrist.
It is simple to move and has 576 possible lock positions.

 

Full extension:

7.5 - 10.5 inches from shoulder to wrist joint
Tilt from 0° to 110°

User Controls:

Easy-access, one-handed operation
Hoop unlocks shoulder only
Paddle unlocks wrist
Tilt lock lever 

Effort to unlock and move:

<1.5 pound force to unlock. Force to move varies with device weight.
Force to adjust tilt depends on torque hinge selected.

Reach required to reposition:

Requires more reach to move out of the way.
Device can be lower than dual; less distance from bottom of arm to top of device
Less placement versatility than dual; fewer locking and operating positions.

View product →

Dual Arm Mount'n Mover

Base price: $1,075.00

This is our most versatile & flexible mount. 
It is the easiest to move and requires little reach.
The dual arm features 3 rotational joints, referred to as the shoulder, elbow, and wrist.
And 13,824 possible lock positions.

Full extension:

15 - 18 inches from shoulder to wrist joint
Tilt from 0° to 110°

User Controls:

Easy-access, one-handed operation
Hoop unlocks shoulder and elbow
Paddle unlocks wrist
Tilt lock lever 

Effort to unlock and move:

1.5 pound force to unlock. Force to move varies with device weight.
Adjustable friction screw changes force required to move it.

Force to adjust tilt depends on torque hinge selected.

Reach required to reposition:

Requires some lateral (side to side) motion, but very little forward reach.
Can be accessed from multiple positions

View product →