Sedeo Pro

Approach 1: Sandwich the Sedeo Armrest bracket (on the right), using longer screws to attach an Adapter Plate.  Approach 2: Use two track nuts (see plate to the left) to attach an Adapter Plate.
Underside of Sedeo armrest bracket shows the extra support it provides.
Sedeo track nut

Offset options

Offsets attach to the wheelchair attachment hardware, and are used to:

  • Get around obstacles such as trays, brakes, footrests and armrests
  • Position the Wheelchair Bracket so the post is in the optimal position (post can be inserted and removed, brakes are unobstructed, footrests removed, accommodate the tray, etc)
  • Adjust the angle of the hardware and/or bracket to make sure the post is vertical

These plates can all be used to offset. To figure out which offset plate will work for you, see our Offset Guide.

How to mount: 

Approach 1: The Sedeo armrest bracket provides a very secure attachment. It attaches to the frame using M5 bolts, and because of its design handles a heavy load. Attach an Adapter Plate to the armrest bracket attachment. Remove the bolts that are in place. Replace with longer M5 bolts, sandwiching the bracket and bolting into the track nuts.

Installation support: 

Suggested extra parts

Manufacturer parts: 

Sedeo Armrest bracket [1010880]

Other hardware: 

Longer M5 bolts and M5 nuts

How to mount: 

Approach 2: Attach an Adapter Plate directly to the M5 track nuts. Use at least 2 track nuts. Attach additional offset hardware such as the L-Angle Extension plate as needed to position the wheelchair bracket.

Installation support: 

Suggested extra parts

Manufacturer parts: 

M5 track nuts and M5 bolts (2 each)