Combi-Seat frame

Attach an Adapter Plate using two bolts. Secondly, attach the Solid Wheelchair Bracket.

Be sure the wheelchair bracket and post clear the armrest.

The Dual Arm and post are set for good access. Because this is a standing wheelchair, the mount and device will change in orientation as the seat rises up. If you want it to stay in the same orientation for sitting or standing, attach to the armrest.

Offset options

Offsets attach to the wheelchair attachment hardware, and are used to:

Get around obstacles such as trays, brakes, footrests and armrests
Position the Wheelchair Bracket so the post is in the optimal position (post can be inserted and removed, brakes are unobstructed, footrests removed, accommodate the tray, etc)
Adjust the angle of the hardware and/or bracket to make sure the post is vertical

These plates can all be used to offset. To figure out which offset plate will work for you, see our Offset Guide.

L-Angled Extension Plate (WC-LAE)

Adapter Plate 2 (WC-AP2)

Adapter Plate 4 (WC-AP4)

Angle Adjustment Plate (WC-AAP)

How to mount:

An adapter plate is attached to the seat frame using existing holes on a welded plate.

Note: the mount's orientation will change when the seat tilts to the standing position. Attach to the armrest if you want the device in the same position from a seated or standing position.