Ultra Low Maxx track

Motion Concepts Ultra Low Maxx track is shown. This is a recent Motion Concepts offering. Older Motion Concepts frames did not have a track style attachment
Remove the plug from the track.
Slide the T-nut into the track.
You can directly attach a Solid Wheelchair bracket to the T-nut.
Or, you can offset the Wheelchair Bracket (WB2) to avoid armrests and cushions by first attaching an L-Angle Extension plate to the T-nut, and then attaching the WB2 to the LAE.
Finally, attach a Mount'n Mover into the WB2, adjust the positioning, and set lock positions.

Offset options

Offsets attach to the wheelchair attachment hardware, and are used to:

  • Get around obstacles such as trays, brakes, footrests and armrests
  • Position the Wheelchair Bracket so the post is in the optimal position (post can be inserted and removed, brakes are unobstructed, footrests removed, accommodate the tray, etc)
  • Adjust the angle of the hardware and/or bracket to make sure the post is vertical

These plates can all be used to offset. To figure out which offset plate will work for you, see our Offset Guide.

How to mount: 

Insert a T-nut in the slide track.

Attach a Solid Wheelchair Bracket directly to the T-Nut, or use an L-Angle Extension Plate for more flexible positioning of the Solid Wheelchair Bracket. 

Installation support: