Leckey Everyday Activity

Leckey Everyday Activity Chair
Unsnap and lift cushion
Attach through the slot on the seat pan, sandwiching it above with an Adapter Plate, and an L-Angle below it.
Adapter plate and L-Angle, attached so L-Angle face is just outside the seat pan.
Attach an Adapter Plate 4 to move the point of attachment for the Wheelchair Bracket forward.
Attach Wheelchair Bracket.
Mount'n Mover attached, and ready to roll!

Offset options

Offsets attach to the wheelchair attachment hardware, and are used to:

  • Get around obstacles such as trays, brakes, footrests and armrests
  • Position the Wheelchair Bracket so the post is in the optimal position (post can be inserted and removed, brakes are unobstructed, footrests removed, accommodate the tray, etc)
  • Adjust the angle of the hardware and/or bracket to make sure the post is vertical

These plates can all be used to offset. To figure out which offset plate will work for you, see our Offset Guide.

How to mount: 

Sandwich the metal seat pan with an Adapter Plate beneath the cushion, positioned above the slot. Beneath the seat pan, align an L-Angle Extension Plate with the slot. Use two bolts and lock nuts to attach the 3-component sandwich. Be sure and position the L-Angle so either it extends out beyond the side of the seat, or so an Adapter Plate can be attached to extend out beyond it for the Wheelchair Bracket attachment.

Note: the slot may be too small for a 1/4" bolt, so you may need to drill it out a bit or use M5 screws.

Installation support: 

Suggested extra parts

Other hardware: 

bolts and lock nuts to secure the Adapter Plate and L-Angle Extension plates to the seat pan