Skippi/Custom Seating

Attach to the welded plate. Align the Adapter Plate so a hole and slot line up with two holes.

Attach an L-Angle Extension plate to provide good placement of the Wheelchair Bracket. Attach to the threaded holes of the Adapter Plate with the bolts provided.

Alternate placement of the L-Angle Extension Plate.

Attach the Solid Wheelchair Bracket to the L-Angle Extension plate. The Wheelchair Bracket can be reoriented on its backplate for more mounting options.

Mount'n Mover attached, and ready to roll!

Offset options

Offsets attach to the wheelchair attachment hardware, and are used to:

Get around obstacles such as trays, brakes, footrests and armrests
Position the Wheelchair Bracket so the post is in the optimal position (post can be inserted and removed, brakes are unobstructed, footrests removed, accommodate the tray, etc)
Adjust the angle of the hardware and/or bracket to make sure the post is vertical

These plates can all be used to offset. To figure out which offset plate will work for you, see our Offset Guide.

L-Angled Extension Plate (WC-LAE)

Adapter Plate 2 (WC-AP2)

Adapter Plate 4 (WC-AP4)

Angle Adjustment Plate (WC-AAP)

How to mount:

Seat attachment: Attach an Adapter Plate to the welded plate with holes in it. Choose a hole and slot combination to attach it so the threaded holes are horizontal or vertical. Use Offsets such as the L-Angle Extension Plate to provide a good position for the Wheelchair Bracket.