Round w/holes

AP4 plate attached to round frame with holes
AP2 plate attached horizontally to round frame with holes
Permobil C300
Attach bridge clamps to the horizontal tube and vertical tube, bridging them with an Adapter Plate.

Offset options

Offsets attach to the wheelchair attachment hardware, and are used to:

  • Get around obstacles such as trays, brakes, footrests and armrests
  • Position the Wheelchair Bracket so the post is in the optimal position (post can be inserted and removed, brakes are unobstructed, footrests removed, accommodate the tray, etc)
  • Adjust the angle of the hardware and/or bracket to make sure the post is vertical

These plates can all be used to offset. To figure out which offset plate will work for you, see our Offset Guide.

How to mount: 

Approach 1: Round tubing with thru holes

Identify two thru holes and align Adapter Plate holes with the two holes.  Orient the Plate so the threaded holes are in a good position for attachment of the Wheelchair Bracket.

Use coved spacers for a more stable attachment, placing the spacers between the Adapter Plate and the tube. Insert the bolts and secure with two lock nuts.

Attach Offsets if needed to move the Wheelchair Bracket forward or outward.

Installation support: 

How to mount: 

Use a Bridge Clamp, with one on the horizontal tube and one on the vertical tube. Attach the Adapter Plate to the two Bridge clamps and use the L-Angle Extension to offset the Wheelchair Bracket as needed to allow footrest removal.

Installation support: