Kids Rock

Kids Rock with Mount'n Mover attached. It is positioned to be used with eyegaze and his tray.
Attached with a 1" round clamp, Adapter Plate 4, Adapter Plate 2, and adjustable Wheelchair Bracket. It is recommended to use a Solid Wheelchair Bracket and Angle Adjustment Plate.

Offset options

Offsets attach to the wheelchair attachment hardware, and are used to:

  • Get around obstacles such as trays, brakes, footrests and armrests
  • Position the Wheelchair Bracket so the post is in the optimal position (post can be inserted and removed, brakes are unobstructed, footrests removed, accommodate the tray, etc)
  • Adjust the angle of the hardware and/or bracket to make sure the post is vertical

These plates can all be used to offset. To figure out which offset plate will work for you, see our Offset Guide.

How to mount: 

Attach to the round tube with a Round clamp, about 2.5 inches below the tie down, and just before the tube angle changes. Use Adapter Plates and other offsets to position the Wheelchair Bracket where needed. Use an Angle Adjust Plate to ensure the Wheelchair Bracket and Post are nearly vertical.

Installation support: 

Suggested extra parts

Other hardware: 

Offsets as needed.