Stryker Bed with Mount'n Mover: A longer post may be used, and an extension offset can move it inward or closer to the head.
Attach L-AE, then Adapter Plate and Square clamp from Wheelchair Bracket
The Wheelchair Bracket accommodates the side rails

Offset options

Offsets attach to the wheelchair attachment hardware, and are used to:

  • Get around obstacles such as trays, brakes, footrests and armrests
  • Position the Wheelchair Bracket so the post is in the optimal position (post can be inserted and removed, brakes are unobstructed, footrests removed, accommodate the tray, etc)
  • Adjust the angle of the hardware and/or bracket to make sure the post is vertical

These plates can all be used to offset. To figure out which offset plate will work for you, see our Offset Guide.

How to mount: 

Locate holes in the frame, just before the hinged leg section. Attach an L-Angle Extension Plate. Attach an Adapter Plate 2 to the inside of the LAE plate. Attach the Wheelchair Bracket to the AP2. You may need to remove the backplate so the assembly is narrow enough for the side rails. 

Installation support: