Media library

Media library

Find images, documents and videos that appear elsewhere on this site. Use the filters below to search by name, type or tag.

Image

TH-Easy_M2.jpg
Position the Mount'n Mover where you would like it--off to the side
TH-Easy_M2.jpg
TH-Easy_M2_EyeGaze.jpg
You can also move it rearward for side-lying eye-gaze access.
TH-Easy_M2_EyeGaze.jpg
TH-ES-AB.jpg
Two Wheelchair Brackets are attached-one with collar clamps and one with bridge clamps
TH-ES-AB.jpg
The NCIS team.jpg
The Solid Wheelchair Bracket can be reconfigured to two positions
The Solid Wheelchair Bracket can be reconfigured to two positions
The Stand+90 is used as a stand when removed from the mount
The Stand+90 is used as a stand when removed from the mount
Side view of chair
THOM-HiLo.JPG
THOM-HiLo.JPG
Round tubing
THOM-HiLo_Round.JPG
THOM-HiLo_Round.JPG
Custom holes drilled into square tube
THOM-HiLo_SQtube-Drill.JPG
THOM-HiLo_SQtube-Drill.JPG
Thread through an Adapter Plate and Coved spacer; select holes and slots that match tube hole spacing.
Thread bolts through AP and coved spacers.jpg
Round clamp on downward slope/vertical. Collar clamps on vertical.
three examples for front page.jpg
Pass Permobil Unitrack bolts through NON-THREADED holes on L-Angle bracket. Loosely screw on nuts. Slide at least three bolts/nuts into both tracks under the armrest. The threaded holes will be needed to attach the next plate.
three pictures together.jpg
Pass through Permobil Unitrack bolts through the NON-THREADED holes on the L-Angle Extension Bracket. Loosely thread on the nuts. Feed the nuts into both Unitracks under the armrest. There should be two nuts in one track and one nut in the other track
three pictures together.jpg
three_mounts_gen2.png
Ti- Lite with round clamp
Ti- Lite with round clamp
Tighten the floor stand
Tighten the floor stand
TiLite ZRA
TiLite ZRA
TiLite ZRA 1_1/4 inch Tubing
TiLite ZRA 1_1/4 inch Tubing
TiLite ZRA 1_1/4 inch Tubing
TiLite ZRA 1_1/4 inch Tubing
TiLite ZRA with 1.250 collar clamp set with angle adjust plate and the WB2 post clamp
TiLite ZRA with 1.250 collar clamp set with angle adjust plate and the WB2 post clamp
TiLIte ZRA with 1.250 collar clamps with a WC-AAP then a WB2
TiLIte ZRA with 1.250 collar clamps with a WC-AAP then a WB2
TiLite ZRA with Laptop Tray and Mount'n Mover dual arm
TiLite ZRA with Laptop Tray and Mount'n Mover dual arm
TiLite Twist--1" round tubing
TiLiteTwist.jpg
Tilt Base (Wrist Joint)
Tilt Base (Wrist Joint)
Tilt diagram
Tilt diagram
Tilt Plate Adapter for CJT Products (DP-TPA-CJT)
Tilt Plate Adapter for CJT Products (DP-TPA-CJT)
Tilt plate is compatible with Mount'n Mover Quick Release Plate
Tilt Plate side.jpg
Tilt'n Turner
Tilt'n Turner
Tilted AP4 plate -WC_AAP corrects the post clamp to vertical
Tilted AP4 plate -WC_AAP corrects the post clamp to vertical
Tiltn Turner for phone
Tiltn Turner for phone
Timeline
Timeline
Tobii I-Series Device Plate, view of bottom tangs
Tobii I-Series Device Plate, view of bottom tangs
Tobii I-Series Device Plate
Tobii I-Series Device Plate
Tobii i16 mounted with the DP-T5
Tobii i16 mounted with the DP-T5
tobii-ati-logo.png
toby-churchill.png
Tom formatted for web.jpg
top down Speakerr.JPG
Top view of the Quickie Zippie 2
Top view of the Quickie Zippie 2
Tray
TR-12x16-Q.jpg
tray and ram phone holder mounted on either side
tray and ram phone holder mounted on either side
tray and ram x-grip phone holder
tray and ram x-grip phone holder
Tray with Lip.jpg
A tray for the Lingraphica tablet
Tray-Lingraphicare.jpeg
tray-stuff-bowlcup.jpg
Bischoff & Bischoff Triplex power wheelchair
Triplex_01_1184x908_03.jpg
Determine diameter of tubes behind leg rests. If it is 1", attach a 1" Round clamp to the vertical tube section. Otherwise, use Collar clamps of the correct diameter and an Adapter Plate to create a bridge clamp. Use offsets as needed.
Triplex_04_1184x908_03.jpg
Tablet tray is plexiglass with bungie cord to hold tablets
TR_iTAB_UR.jpg
tsd.png
Two 1.125 inch collar clamps_WCAP4_WCLAE_WB2
Two 1.125 inch collar clamps_WCAP4_WCLAE_WB2
Two dual arm Mount'n Movers on a 24 inch post
Two dual arm Mount'n Movers on a 24 inch post
Two dual arm Mount'n Movers on a 24 inch post
Two dual arm Mount'n Movers on a 24 inch post
two examples for front page.jpg
A Pow!r joint is controlled by one or two switches, plugged into the End Cap
Two Switches.jpg
Two WC_AP5 plates and a WB2
Two WC_AP5 plates and a WB2
U-shapes holding phone on small tray.jpg
U-shapes holding phone on small tray.jpg
U-shapes holding phone on small tray.jpg
Under the arm attachment option Permobil
Under the arm attachment option Permobil
Attaching to the Permobil Unitrack is preferred, but not all Corpus chairs have it installed.
unitrack1.jpg
Permobil C300 with UniTrack
unitrack1.jpg
Permobil C350 with UniTrack
unitrack1.jpg
unitrack2.jpg
unitrack3.jpg
unitrack3.jpg
Universal Access Station Kit.jpg
Universal Access Station Kit.jpg
Universal Rotator
Universal Rotator
Universal Rotator (DP-UR)
Universal Rotator (DP-UR)
Universal Rotator in use at a slight tilt
Universal Rotator in use at a slight tilt
Universal Rotator on the back of iTab Tray
Universal Rotator on the back of iTab Tray
Upper bar uses 7/8" clamps. Lower bar uses 1-1/8" clamps
Upper bar uses 7/8" clamps. Lower bar uses 1-1/8" clamps
Use longer shoulder bolts (included) to attach initial plate
Use longer shoulder bolts (included) to attach initial plate
Use one inch bridge clamps
Use one inch bridge clamps

Document

PDF icon This is a test PDF
This is a test PDF
PDF icon Tilt Plate Adapter with Rehadapt Mount.pdf
Tilt Plate Adapter with Rehadapt Mount.pdf
PDF icon Tilt'n Turner Manual (TNT)
Tilt'n Turner Manual (TNT)
PDF icon Tilt'n Turner Quick Guide (TNT)
Tilt'n Turner Quick Guide (TNT)
PDF icon Tilt'n Turner Technical Drawing
Tilt'n Turner Technical Drawing
PDF icon Tobii Dynavox SC Tablet Pro 12.9.pdf
Tobii Dynavox SC Tablet Pro 12.9.pdf
PDF icon Tobii Dynavox SC Tablet Pro.pdf
Tobii Dynavox SC Tablet Pro.pdf
PDF icon Tobii I13 and I16 attaching to the Easy Mover with Quick Connect instructions.pdf
Tobii I13 and I16 attaching to the Easy Mover with Quick Connect instructions.pdf
Office presentation icon Training Presentation
Training Presentation
PDF icon Training Presentation 2016.pdf
Training Presentation 2016.pdf
PDF icon Training Presentation 2016.pdf
Training Presentation 2016.pdf
PDF icon Tray Attachment Instructions (All models)
Tray Attachment Instructions (All models)
PDF icon Trekker Attachment.pdf
Trekker Attachment.pdf
PDF icon Universal Access Station Kit Product Sheet
Universal Access Station Kit Product Sheet
PDF icon Universal Access Station Kit Product Sheet.pdf
Universal Access Station Kit Product Sheet.pdf
PDF icon UNIVERSAL ROTATOR Instructions
UNIVERSAL ROTATOR Instructions
PDF icon UNIVERSAL ROTATOR INSTRUCTIONS.pdf
UNIVERSAL ROTATOR INSTRUCTIONS.pdf
PDF icon Usability Testing of Repositionable and Customizable Locking Mounts with Rehabilitation Professionals
Usability Testing of Repositionable and Customizable Locking Mounts with Rehabilitation Professionals

Video

File TransferSideOpposite.AVI
TransferSideOpposite.AVI
File Transporting your Mount'n Mover: Floor Stand to Wheelchair to TableClamp
Transporting your Mount'n Mover: Floor Stand to Wheelchair to TableClamp

Pages

Displaying 2601 - 2700 of 2966